Fin Strap Installation     

Rubber Lug   (Scuba Pro Jet/Twin Jets/Aqua Lung Jets)

(1) remove rubber fin strap
 


(2) push one leg of pin into hole as far as possible

(3) work other end of pin over edge of lug and into hole



(5) if loose, pull away from fin and slightly squeeze legs together with vice grips or channel lock pilers.
(4) with both legs of pin in place pull plastic barrel over edge of lug flush against fin

(6) once plastic is snug, repeat on three remaining pins.

Copyright (C) 2005 Manta Industries. All rights reserved.

Back Home